Passenger Side Radiator Panel

October 4, 2016 -

  I attached the passenger side radiator side panel today.  I put the bulb seal along the top but noticed it didn't need any trimming like the driver's side. (Caveat, the radiator front aluminum panel did need to be trimmed along the end so it would lay flat, short of the frame.)  I suspect possibly my radiator isn't totally level maybe? I don't think this is a serious issue but might check with the forums and will have Whitby check it out as well when they get it for the body work.

Driver Side Radiator Panel

September 29, 2016 -

  I attached the driver's side radiator side panel.  This took a lot of trimming along the top and I did put the bulb seal on the top of it.

Radiator Front Panel

September 21, 2016 -

  I attached the front panel of the radiator using stainless nuts and bolts I bought at the hardware store. I used these instead of the rivets mentioned in the manual because I think the painter will need to remove this in order to take the body off for paint and I thought I would make it easier.