Title and Regsitration

September 19, 2018

  I mailed off my packet to the DMV today for a title and registration. It needed to include DMV forms 17A and 22 as well as a copy of my driver's license, the certificate of origin from the manufacturer (needed original so scan it first), invoices of the major parts, proof of address, and a check for the title and exam fee ($140) plus 4.15% tax on the price of the parts (take out freight charges.) I also had to include a document describing the construction with photos along the way and final photos of the front and side of the vehicle. This blog made that super easy! Here are the front and side photos I sent in. I think the blue is a little darker in person.

Touch Up

September 13, 2018 -

  After the trip back there were a few things not working which required a couple hours of head scratching and fixing. There was a blue bulb burnt out in one of the fog lights. I replaced both blue bulbs with some blue LED Sylvania bulbs that are so much brighter, bluer and better all around. The man at the store also sold me a small packet of socket grease to prevent corosion.  This may sound superfluous but I've had a socket in my old car corrode and get pretty nasty.  These fog lights are right up front taking road spray so I thought why not for $1.68 try it. Next up were the brake lights not working. Fortunately this was a matter of positioning the button switch that rests against the brake pedal with a washer. Lastly and most confusing were the turn signals that weren't working. The number one culprit on turn signals is a busted flasher in the fuse panel and that was definitely not working. (The hazards worked and you can test flashers by swapping the two.) But the working flasher didn't make the turn signals work either. I did a lot of voltage probing to finally realize that unlike just about all the other lights, turn signals only work when the key is in the ON position (the one that makes the fuel pump run.) Turning the key the other way to the ACC position will make all the other lights work but for some reason not the turn signals. Once I tested the hazard flasher with the key in the ON position the turn signals worked so it was just a matter of buying a new flasher.

Pickup

September 6, 2018 -


  Thank you to my sister Meredith and my dog Whiskey for making the trip down and back with me to pick up the car at Whitby Motorcars in Greensboro, NC. Here it is at Whitby's:

  Here are a few pickup photos courtesy of Jeff at Whitby's. (I've started a diet, I promise!)

  Pulling away...

  And here it is in my garage!

Ready for Pickup!

September 5, 2018 -

  Whitby Motorcars has told me my car is ready for pick up. My sister and I are driving down tomorrow to get it!

Sanding

May 11, 2018 -

  It's been a while but I guess I wasn't in a hurry to get a roadster in the winter. Here are some April photos where you can see the primer up close having been sanded smooth. You might also remember there being mold seems that had to be filled in on the fiberglass body. So those seem spots are looking good now too.

Slicksand

November 21, 2017 -

  This process has taken longer than I thought it would but the reasons are 1) there was a line of cars in front of me at Whitby's and 2) there are numerous coats of sanding, primer, sanding, more primer, etc. all before the numerous layers of paint go on and in between each layer are several weeks of curing. That's the only way Jeff at Whitby's says it'll come out great if great is what you want. I figure I'm not in a rush. They sent me this photo of my car's body in their paint room at the point of "slicksand."

Transport To Paint

April 18, 2017 -

  Here's me taking the car down to Greensboro, NC to get the body work and paint done at Whitby's. I got a UHaul trailer and was able to make it down and back in one day! Thanks to mom for the use of her truck.

  I didn't want to leave Whiskey home alone all day so I took her along for the ride. She napped most of the time.

  Here's me and my car down at Whitby's in the garage area. (There's a whole other building for paint and machining parts.)

  Mine is the left one a little further back with the box of parts on it.