A couple nights ago I worked at fitting the passenger door. This was a lot harder than the driver's side door. This one took a lot of sanding to get it to fit ok where the top of the door meets the rear body panel part. At this stage you really want the top two corners to fit with the body well. Later you can move the main body in or out some to get the bottom corners to look right.
Today I put the striker and the latch on. Fairly similar to the driver's side here. I ended up using the latch spacers on both the passenger and driver sides. I think riders will feel a lot safer now. :-) Here is a picture of both doors latched.
No comments:
Post a Comment