Today I finished wiring in the power distribution module which attaches to the Coyote (engine) wiring harness that comes off of the computer. I put it in with the labels and lights facing up just above and right of the steering shaft on the cockpit side of the firewall. I used 3/16" rivets to attach it to the firewall and put the rivets in with the "good looking" side on the engine bay side of the firewall since one might sometimes see that but I don't think anyone will see behind the dash on the cockpit side of the firewall. Here it is:
.JPG)
I also got the connectors and hose clamps I needed to put the last coolant hose on the heater. Here are the two heater hoses hooked up:
No comments:
Post a Comment